Renovating and painting wood: which accessories you definitely need

The first question you ask yourself, though, is what tools you are going to use to renew or oil the wooden material. Choosing the right tools is certainly important.

Whether you have already chosen the right colour of oil coating, need advice on renovation, or are planning to recolour your floor, cladding, deck or furniture, it is then time for the secondary accessories.

It is precisely the accessories for painting and renovating wood that ensure a clean, even finish. One that also lasts.

With the right accessories, painting will be much easier, which is why we bring you a practical guide.

What wood renovation is and what steps it involves

Before that, though, let us explain what wood renovation is and what steps it involves:

• cleaning the surface,
• preparation by sanding or filling cracks,
• applying a wood preservative (if one is needed),
• applying a coating in the form of oil, wax, woodstain or paint,
• final finishing.

The aim of a wood coating is, besides visual improvement, also wood protection against moisture, UV radiation and the resulting wear.

Here at Zrubko you will find top-quality products from Osmo and Remmers, intended for both interior and exterior use — for floors, decks, cladding and exterior wood.

You can choose from a wide range of products according to material and need – for example hardwax oil, UV-protection oil, decking oil, oil stain, natural oil woodstain, Country Colour and more.

@KATEGORIE: /en/wood-paints-and-oils/, 3

Accessories for renovating and painting wood

Just as important as the material, however, are the accessories: brushes, rollers, pad/fleece holders, tool cleaners, paint removers and wood revivers, which make application easier and extend service life.

Below we have therefore prepared and sorted the individual items you need into logical groups. In each group we also give specific product tips that have proven themselves at Zrubko, and explain their function. After all, without the right tools even the best oil or paint can be applied unevenly, leave streaks or wear quickly.

• Rollers (10 cm, pack of 2) – suitable for quick application of oils and woodstains on larger areas (floors, cladding, decks).
• Hand holder for pad or fleece (85 × 135 mm) – for manual, controlled application and spreading of oils and waxes, especially on smaller areas or details.
• Brushes and sets (roller & brush set, microfibre rollers, paint trays) – for precise application on edges, corners and profiles; microfibre rollers are suitable for oil systems (e.g. Osmo).
• Tool cleaner (Brush Cleaner and Thinner) – for cleaning brushes and rollers after working with oils and solvent-based coatings; extends the service life of tools.
• Paint remover and wood reviver – technically these are treatment products, but from the point of view of the process they are “accessories” for surface preparation.

@PRODUKTY: /en/osmo-roller-10cm-pack-of-2/, /rucny-drziak-na-pad-85x135-mm/, /stetec-plochy/

Why is it worth keeping this article in mind even if you have only come to buy the material itself? In practice, if you buy floor oil and pick up a roller/tray or pad holder and a tool cleaner at the same time, you will save time and get a better result.

Other necessary materials include sandpaper of various grits or sponges, a vacuum cleaner, a broom, fillers for wood such as putties and filling knives to go with them, or paint trays, grids and sheeting.

Definitely do not underestimate protective equipment such as gloves, a face mask and goggles – especially when sanding and working with chemical products.

@KATEGORIE: /en/accessories-for-wood-paints-and-oils/, 3

10 most common questions: accessories and preparation for painting wood

1. Why does it make a difference which tools you use when coating wood?

Although it may be tempting to buy a high-quality oil or paint and lower-quality accessories, with incorrect use even the highest-quality material can be applied unevenly. If you had the wrong brush or roller, you would run the risk that streaks or blotches remain on the surface, or the coating wears out much faster over time.

It is precisely the right accessories that can ensure a clean and durable finish of the wooden material.

2. When to use a roller, pad or brush to apply oil and woodstain to wood?

The choice of tool depends mainly on the size and intricacy of the surface being treated.

Microfibre rollers for oil and woodstain are ideal for quick and even application of coatings on larger areas such as wooden floors, decks, cladding or facades.

A hand pad or abrasive fleece is suitable for controlled hand-rubbing of oil into wood and for spreading it evenly.

Brushes for oil and woodstain are indispensable when coating corners, edges, details and profiled or hard-to-reach areas.

3. How to proceed correctly when renovating and treating wood?

Correct wood renovation step by step starts with thorough cleaning of the surface. Then, depending on the condition of the wood, the surface needs sanding and any cracks or damage filling with a suitable putty.

With some wood species and in demanding exterior environments, a wood preservative may also be needed. This is followed by applying the chosen coating, for example wood oil, wax, woodstain or paint.

The last step is correctly spreading or finishing the coating and observing the recommended drying time.

4. Do I always have to sand wood before a new coating?

Not always. Whether you need to sand wood before a new coating depends on its current condition and on the type of the new coating.

If the original coating is cracked, peeling or you are switching to a different type of coating system, thorough sanding is important for good adhesion of the new coating. When regularly renewing wood with the same type of oil, it is often enough to clean the surface thoroughly and prepare it according to the manufacturer's recommendations.

5. What is a wood reviver and when should you use it when renovating a deck or facade?

A wood reviver is a product intended mainly for treating exterior wood that has turned grey as a result of UV radiation, moisture and weather conditions.

It is used, for example, when renovating a grey wooden deck, facade or garden furniture. A wood reviver helps remove surface greying and restore a more natural appearance of the wood before applying a new oil or another protective coating.

@PRODUKTY: /en/remmers-wood-greying-remover-2-5l-gel-water-based/, /odstranovac-farby/, /osmo-wpc-aluminium-cistic--1-l/

6. How to clean brushes and rollers after coating with oil or woodstain?

Tools used for wood oils and woodstains should not be cleaned with water alone, because oil coatings do not dissolve in water.

To clean brushes, rollers and other tools, it is best to use a special tool cleaner or Brush Cleaner and Thinner, depending on the type of coating used. Proper cleaning removes coating residues, helps preserve the properties of the tools and extends their service life.

7. What equipment do I need for renovating, sanding and coating wood?

In addition to the brush or roller itself, when renovating and coating wood, other accessories also come in handy.

The basics are sandpaper of various grits, sanding sponges, suitable putties and filling knives for repairing damage. For applying coatings, paint trays and grids are practical. When preparing the work area, do not forget protective sheeting, a broom and a vacuum cleaner to remove dust and dirt.

8. What protective equipment to use when sanding and coating wood?

Protective equipment for wood renovation helps protect your health and skin while you work.

When sanding wood and old coatings, fine dust is produced, so it is advisable to use respiratory protection and safety goggles. When working with coating removers, wood revivers, thinners and other chemical products, suitable protective gloves are important.

When choosing protective equipment, always follow the instructions on the label of the specific product.

9. Why buy accessories for coating wood together with paint, oil or woodstain?

Choosing the right accessories together with the coating saves time and can make the whole application process much easier.

If, for example, to go with oil for a wooden deck you choose a suitable microfibre roller, paint tray, pad and tool cleaner, you have everything you need ready for the job. Correctly chosen tools also help achieve a more even result and reduce the risk of damage or unnecessary ruining of high-quality brushes and rollers.

10. What is a protective wood coating for and what does it protect wood from?

The main purpose of a protective wood coating is not just to change its colour or appearance.

A high-quality oil, woodstain, wax or other suitable coating helps protect wood against moisture, UV radiation, drying out and mechanical wear. Correctly chosen and applied wood protection indoors and outdoors can help extend its service life and preserve its appearance – whether it is a wooden floor, deck, cladding or garden furniture.

@PRODUKTY: /en/osmo-application-fleece-for-wood-95x155mm-green/, /osmo-valcek-25cm-fresh-box/, /osmo-uv-ochranny-olej-extra-420/

We will be happy to help you choose

Can't decide which oil, woodstain or accessories are right for your wood? We will be happy to help you choose the materials. We have plenty of accessories available directly in stock, and we are also open on Saturdays.

You can find us at zrubko.sk or in person at our shop in Kysucké Nové Mesto. Or simply order online and we will deliver straight to your door.